12V 433MHz Universal Winch Wireless Remote Control Switch Kit For Jeep ATV SUV

Description

Feature: 1.Remote range up to 75ft. 2.Transmitter equipped with long life. 3.Battery and power saver circuit. 4.Transmitter and receiver. 5.Visual indicator light shows remote opreation. 6.Additional transmitters available to operation. Specification: Type Winch Wireless Remote Control Switch Kit Material Plastic Color Red , Black Range 75ft Remote size about 6x4.3x2.3cm Controller size about 15x6.7x3.8cm Connection voltage 12V DC Battery not included 6F22 9V Wires Connection Yellow Wire:IN White Wire:OUT Red Wire:Positive , Black Wire:Negative - Blue Wire:Antenna WARNING: The wireless remote is designed for use on front mount self-recovery winches only. The remote is not designed for and should not be used on winches or hoists in industrial applications commercial car hauler,carriers, wreckers, cranes, etc. or for any other remote controlled applications. Operation method: 1. Disengage the clutch of your winch. 2. Pull out the winch wire rope about 1.5 meters. 3. Reengage the clutch of your winch. 4. Insert the plug of remote control receiver into the winches' solenoid control box female connector, if your wireless remote control is -03 type, you should properly connect the black earth line to the battery negative. 5. Put your receiver at a certain place. 6. Keep the antenna of receiver out and straight. 7. Pull out the antenna of transmitter, and move down the cover of your transmitter, bare out the control button. 8. Press the button, you can operate your winch start, stop, in or out. Each remote control comes with its own code so there is no interference with other similar remote control Note: -Please allow 1-5mm error due to manual measurement. -The colors may have different as the difference display,please understand. Package Included: 1 X Remote Handset 1 X Receiver 1 X English User Manual no battery included