Description
Documents:Manual: Click here to openSchematic: Click here to openDatasheet: Click here to openCode: Click here to openSIM7600 Driver: Click here to opendriver for wwan0: Click here to openTools: Click here to open
Overview:
This is a 4G/3G/2G communication and GNSS positioning module designed for Jetson Nano, it supports global LTE CAT4 up to 150Mbps for downlink data transfer, with pretty low power consumption.Just attach it onto the Jetson Nano Developer Kit, easily enable functions like 4G high speed connection, wireless communication, remote video monitoring, making telephone call, sending SMS, global positioning, and so on.
Features:
1. 40PIN GPIO extension header for connecting Jetson Nano2. Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Supports GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Break0ut UART control pins, to connect with host boards like Arduino/STM326. SIM card slot, supports 1.8V/3V SIM card7. Onboard 3.5mm audio jack with earphone and mic support, for making telephone call8. 2x LED indicators, easy to monitor the working status9. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper10. Baudrate: 300bps ~ 4Mbps (default: 115200bps)11. Autobauding baudrate: 9600bps ~ 115200bps12. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)13. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT14. Comes with development resources and manual (examples for Jetson Nano/Raspberry Pi/Arduino/STM32)
Communications Specifications:
LTEWCDMA / TD-SCDMA / CDMA 2000EDGEGSM/GPRSBandLTE-TDD B34/B38/B39/B40/B41UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19GSM/GPRS/EDGE 850/900/1800/1900MHLTE-FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66Emitting power0.25W0.5W@EGSM9002W@GSM9000.4W@DCS18001W@DCS1800Data SpeedLTE CAT 4UMTSTD-SCDMACDMA2000/EVDOEDGEGPRSUplink?50 MbpsUplink?384KbpsUplink?128KbpsUplink?1.8MbpsUplink?236.8kbpsUplink?85.6kbpsDownlink?150 MbpsDownlink?384KbpsDownlink?384KbpsDownlink?3.1MbpsDownlink?236.8kbpsDownlink?85.6kbpsHSPA+TD-HSDPA/HSUPAUplink?5.76MbpsUplink?2.2MbpsDownlink?42MbpsDownlink?2.8MbpsSIM CardNormal SIM (Not Included)Applicable RegionGlobal 4G/3G/2G
GNSS Specifications:
Receiver type -16-channel -C/A codeSensitivity -Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD) -Cold starts: -148 dBmTime-To-First-Fix (open air) -Cold starts: <35s -Hot starts: <1sAccuracy -Position: <2.5m CEP
SMS and Audio Specifications:
SMS -Supported types: MT, MO, CB, Text, PDU -Storage: USIM card and ME (default)Audio feature -Supports echo cancellation -Supports noise reduction
Other Specifications:
Power supply: 5VOperating voltage: 5V/3.3V (configured via jumper)Operating temperature: -30°C ~ 80°CStorage temperature: -45°C ~ 90°C
Package includes:Note: Jetson Nano is NOT included.
1 x SIM7600G-H 4G for Jetson Nano 1 x LTE Antenna 1 x GPS External Antenna (B) 1 x Jetson Nano USB Adapter 1 x Screws pack (2pcs)
What's on Board:
1. SIM7600G-H2. NAU8810 audio decoder3. TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V4. MP1482 power chip5. RT9193-33 voltage translator: translates 5V into 3.3V6. 40PIN GPIO header: for connecting with Jetson Nano Developer Kit7. SIM card slot: supports 1.8V/3V SIM card8. USB interface: for testing AT Commands, getting GPS positioning data, etc.9. 3.5mm earphone/mic jack10. MAIN antenna connector11. AUX antenna connector12. GNSS antenna connector13. Network status indicator14. Power indicator15. UART enable switch: -ON: connect UART ports of SIM7600 and Jetson Nano -OFF: disconnect UART ports of SIM7600 and Jetson Nano16. Operating voltage selection jumper: -VCC - 3.3V: set operating voltage as 3.3V -VCC - 5V: set operating voltage as 5V17. PWR control config: -PWR - 5V: SIM7600 auto startup on power up -PWR - D6: SIM7600 will be turned on/off by D6 pin of Jetson Nano
Dimension:
