Description
Features: - EVA+PET at front panel, light-weight but durable.- USB and DC output interface for more purpose.- Equipped with 12V DC5.5x2.1 & 5V USB output interface.- Dedicated for 12V battery and 5V device charging. - High output 3000mAh USB, can full-charge an iX in 1.5h in max power.- Mono-crystalline solar Cell with efficient up to 21%.- 4x eyelet and free 2x carabiners for mounting more conveniently.- IP65 waterproof, suitable for outdoor using in light rain. Specifications: Pmax: 100WVpmax: 18VMax USB Regulator Output: 5V 3000mA & 2400mAMax DC5.5x2.1 Regulator Output: 12V 2000maCells: Monocrystalline Material: EVA + PETSize of Panel: 660x280x2.5mmSize of Package: 680x280x35mmLength of DC Output Cable: 110mm About the Controller:1.It comes with a controller which is good for protecting the battery.2.The controller is 12V & 24V adaptive.3.Usually a 10A controller is enough for this panel coz the Ipmax is about 2.3A, if you wanna use the controller in other higher-powered solar system, you can choose 20A or 30A, too. Package Included: 1 x 100W Panel4 x Suckers1 x 10A Solar Controller2 x DC Adapter Cablewith Other Cables Instruction:
1.Insert USB cable for standard 5V output to charge 5V device. 2.Connect DC alligator clip for standard 12V battery.3.Connect DCcigarette lighter plug clip for car battery charging.4.Note! DO NOT have the positive and negative anodes of the Alligator clip to touch or connect to each other, or it will cause short circuit and burning. Note:The Junction Box of this panel is mounted on the Back! So it`s not suitable to be glued on the roof of the vehicle. Caution:
1.Keep it away from strong corrosive objects!2.Don`t have hard objects scratch the surface!3.Don`t bend it over 10° though it`s flexible coz it`s small size!4.Don`t try to refit the circuit of the without authorization coz it`s not a DIY panel, or it may cause the product damage!Please do not5.Don`t place the junction box side under heavy rain coz it`s only IP65 waterproof!
