Description
Feature:Product Name: 2.0 channel audio amplifier module with ToneProduct Model: ZK-1602TBT Version: 5.0 (no shielding, 10 meters)Audio Input: AUX + BT + USB (Dial wheel button toggles song and mode)Channel: 2.0 (Left channel + right channel)Chip Solution: TDA7498EAdaptive power supply: DC15~36 V (Under voltage protection below 9V, and 12V power supply can also be supported)Adapter Speaker: 30-200W, 4-8?Output Power: Max 160W @ R&L channelProtection Mechanism: Anti reverse connection, undervoltage, overheating, overcurrent, short circuit protectionProduct Size: 134*80*28mmProduct weight: net weight 209g, package weight 257gTip: when the audio signal input is large enough and the power supply voltage / current is large enough, there will be enough output power!The higher the power supply voltage, the greater the output power, the smaller the horn impedance, and the greater the output power!Please ensure that the power of the adaptive power supply is greater than the actual working power of the power amplifier!
Package includes:
1 x Audio amplifier module kit
FAQ:
1. How to choose a power supply?The power supply is very important. The ripple of the selected power supply must be small. The power supply with large ripple will cause the noise of the power amplifier board to increase, and there will be current noise. The higher the voltage, the greater the current and the more output power. If you only have 12V1A, you can use 3-4 inch speakers. If you are 19V 5A or above, with 8-10 inches no problem, the power supply must be highly valued. If the voltage is too low, the sound will be distorted after amplification. If the current is too small, the speaker will pull down the voltage and cause abnormal operation or poor sound quality.It is recommended to use a 18V/19V/24V power supply with a current of more than 5A, or a power supply with a current of 32V7A or more. If you only have 12V/15V 2A power supply, you can also use it, but the power is low. When using the volume, it may be distorted and affect the sound quality. If you want to get the maximum output power, it is recommended to use an adapter above 32V7A, 160W~200W 4? speakers, and adjust the volume to the maximum.2. How to choose speakers?About the type of speaker: the commonly used speakers are generally 4-8 ohms, which can be used. The left and right channel speakers need to be connected to full-frequency speakers or mid-high frequency speakers, and the power is between 30W-200W.If your speaker power is small, for example, it can be used between 20W-50W, but the power supply voltage needs to be lower to prevent the speaker from being burned after amplifying the sound. For example, choose a power supply below 15V. The higher the voltage selected, the greater the sound or power that can be output. Speaker power should not exceed 200W, otherwise it will affect the sound quality.3. Introduction of audio input modeThis audio power amplifier module has three audio input methods: one is Bluetooth input, one is AUX audio input, and the other is U disk input. In Bluetooth mode, if you insert an audio cable or U disk, it will automatically switch to audio input mode or U disk input mode, and Bluetooth mode has the lowest priority. When the audio cable or U disk has been inserted, you can also use the dial button to switch the mode.4. How to adjust the total volume?The VOL knob adjusts the overall volume. Turn right to increase the overall volume, and turn left to decrease the overall volume.5. How to adjust the left and right channel high and low?The BASS knob controls the bass, right-handed bass boosts, and left-handed bass attenuates. When the knob is in the middle position, the bass is neither boosted nor attenuated.The TREBLE knob controls the treble, the right-handed treble boosts, and the left-handed treble attenuates. When the knob is in the middle position, the treble is neither boosted nor attenuated.Note: The treble and total volume are adjusted to the maximum at the same time, which may easily cause the protection of the power amplifier and cause the sound to freeze. Lower the treble or turn the right volume knob to the left to reduce the overall volume.6. Its okay if the sound is small, but when the sound becomes louder, the sound becomes muddy?The sound is distorted, please turn down the overall volume or change to a power adapter with a higher voltage level.7. Its okay if the sound is small. After the sound becomes louder, the sound is stuck?If the power of the input power supply is insufficient, the power supply itself is intermittently powered off for protection, please replace the power supply with a higher power; or the output power is too large, the power amplifier board is seriously heated, and thermal protection occurs, reduce the volume or strengthen the heat dissipation.8. What factors are related to the quality of sound quality?The quality of sound quality is not only related to the power amplifier module, but also to the power supply, audio source and the entire audio system. Basically, every link of the audio system will affect the sound quality, among which the main links are the audio transmission line, the audio power supply, the tone circuit, the power amplifier circuit, the speakers and the surrounding environment. Only when the audio source, power supply, power amplifier module and speaker match, the sound quality is the best.
