Description
Specifications Of The Transmitter: Model Number: KT05-4Operating Frequency: 433MHz/315MHzPower by 3V Coin Cell Button Battery (Battery included )Material: PVCButton: 2 ButtonsSize: 59mm x 28mm x 8mmOperating Voltage: 3V Operating Current: 12mATransmitting Power: 10mwModulation Mode: ASK (AM)Encoding Type: LearningTransfers Distance: 20-50 m Specifications Of The Receiver: Model Number: KR2202-4Product Type: Dual Channel Remote Control SwitchEncoding Type: Intelligent Learning CodeRF Working Mode: Superheterodyne ReceptionModulation Mode: ASKWorking Mode: Momentary, Toggle and Latching Mode.RF Frequency: 433MHz/315MHzInput Voltage: AC 85V~250VStandby Current:<8.5mAReceiving Sensitivity: >97dbmRemote Control Range: >50m (Free Space)Wired Connection Way: Fixed Wiring PillarOutput Terminal: NO, COM, NCOn-off Output (Wire Port): NO(Normal Open), COM(Commonality End), NC(Normally Closed End).Color: Green (PCB Board), White (Outside Shell)Circuit Board Size: 7.3 * 5.2 * 2.5cmOperation Introduction: About Working Mode:Momentary: Press the remote button, the relay connects, release the remote button, the relay disconnects.Toggle: Press once the remote button, the relay connects, press the remote button twice, the relay disconnects.Latching: Press the remote button A, the relay connects, press the remote button B, the relay disconnect. Clearing the Code:Press the Learning Button on the receivers for 8 times, the codes will be cleaned.After cleaning the code, all the remote control cannot work anymore. Learning the Code: (Momentary)Press the learning key on the receiver once time, it comes into momentary setting mode.Wait for a moment, the LED will be off, it comes into learning state.Push the remote button, LED indicator on the receiver board will flash then come off.After 3 seconds, the LED indicator will be on again, it means learning successfully. Learning the Code: (Toggle)Press the learning key on the receiver twice, it comes into toggle setting mode.Wait for a moment, the LED will be off, it comes into learning state.Press the remote button, LED indicator on the receiver board will flash then come off.After 3 seconds, the LED indicator will be on again, it means learning successfully. Learning the Code: ( Latching)Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF.For example: Button A = ON, Button B = OFFPress the learning key on the receiver triple time, it comes into latching mode.Wait for a moment, the LED indicator on the receiver board will flash then come off.Press the remote button A. LED flash for 5 times.Press the remote button B. LED flash for 5 timesAfter 3 seconds, the LED indicator will be on again, learning successfully.A = ON, B = OFF.A = ON, B = OFF. Package Includes: 1 x KR2202-4 2CH Receiver Module ( include Shell )5 xKT05-4 EV1527 Learning Code Remote Control (Include Battery)
