3.2 Inch 8Pin 240*320 TFT LCD Screen SPI Serial Display Screen Module ILI9341 Geekcreit for Arduino – products that work with official Arduino boards

Description

Description: Size: 3.2 inchesControl chip: ILI9341Resolution: 240*320 (RGB)Display area: 48.60 (W) *64.80 (H)Physical size: 56 (W) *89.40 (H) *4.65+/-0.15 (T)Interface type: 3 line serial port /4 line serial portNumber of pins: 8PinDisplay color: Full colorPixel size: 0.2025 (W) *0.2025 (H)Working temperature: -20 ~ 70 degrees

PIN No.SymbolDescription1GNDGround2VCCPower supply for LCD(2.8V-3.3V)3CLKThis pin is used serial interface clock in 3-wire 9-bit / 4-wire 8-bit serial data
interface.4MOSISerial input signal.
The data is applied on the rising edge of the SCL signal.5RESLCM Reset pin.Signal is active low.6DCServes as a write signal and writes data at the rising edge.
- 4-line system (D/CX): Serves as command or parameter select.7BLKBacklight switch pin. Low level turns off the backlight, other states turn on the backlight8MISOSerial output signal.
The data is outputted on the falling edge of the SCL signal.
If not used, open this pin Package Included:

1 x 3.2 Inch TFT LCD Screen