Description
Features: -Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.-Can turn off the display for a long time, reducing power consumption-Synchronous data acquisition serial outputInput supply voltage: DC 7 ~ 30V universalOutput controllable power: DC / AC within 30AProbe model: K-type thermocouple Wire length 0.5MScrew head specifications: M6Resolution: 1 degree Function Description: (A and B are the values ??we can set by ourselves)P--1: When the measurement is lower than the temperature value A, the relay is activated, and when the temperature is higher than the temperature value B, the relay is disconnected;P--2: When the measurement is higher than the temperature value B, the relay is activated, and when the temperature is lower than the temperature value A, the relay is disconnected;P--3: When the measured temperature is between A and B, the relay is turned off, and the relay is closed in other cases;P--4: When the measured temperature is between A and B, the relay is closed, otherwise the relay is opened;P--5: When the measured temperature is higher than the temperature value B, the relay is turned on, and the temperature is lower than the A relay is turned off;P--6: When the measured temperature is higher than the temperature value A, the relay is activated; it is always activated; until the power is cut off manuallyP--7: When the measured temperature is equal to A each time, the relay outputs a jog signalSetting instructions: Power-on indicates that the measured temperature enters the standby state; Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), the screen flashes: P --1: K2 plus mode, K3 minus modePress K1 a second time, the screen flashes: A025 means: A = 25 degrees: K2 and K3 adjust APress K1 a third time, the screen flashes: B035 indicates: B = 35 degrees: K2 and K3 adjust BPress K1 for the fourth time, the display shows the measured real-time temperature indicating that it has entered the standby state;Press K4 in standby mode to permanently turn off / on the display and switch the low power consumption mode. Package Included: 1 x YYW-2 0-1024 ? Temperature Sensor Module1 x K Type Thermocouple Sensor Cable
