Description
Feature:Product Name: Digital display embedded cabinet thermostatProduct model: XH-W2060Temperature range: -19~99 °CControl range: -19~99 °CTemperature control accuracy: 1 °CMeasurement input: NTC10K waterproof probe L = 1 mRefresh rate: 4 times / secUse environment: -30~60°C Humidity 20%-85%Use environment: 12/24/220V optionalOutput type: Relay output up to 10AAppearance size: 77 x 62 x 34.5mmOpening size: 71 x 29mmOther functions: Power-off memory, state memory, temperature correction, delay start
CodeCode DescriptionSetting RangeFactory settingsUnitP0Operating modeC/HC /P1Hysteresis setting0.1-502°CP2Temperature correction -9~90°CP3Delayed start0-90MinuteP4High temperature alarm -19~9999°C
P0: Temperature control modeC: Cooling mode H: Heating mode P1: Difference settingFor example: P1=5Cooling mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the cooling is stopped, the temperature rises by 5 °C, and the relay closes again.Heating mode: When the detected temperature reaches the stop temperature, the relay is disconnected, the heating is stopped, the temperature drops back to 5 °C, and the relay closes again. P2: Temperature correctionIf the detected temperature and the actual temperature deviate, you can use this function to correct. Actual value = measured value + corrected value. For example, if the measured temperature is 25 ° C and the actual temperature is 26 ° C, then P2 can be set to 1, then The final temperature is 25+1=26 P3: Delayed startThis function is used for compressor cooling. If it is used in a refrigerator freezer, this value must be set. According to the compressor back pressure, the value is usually set to 3-6 minutes. P4: High temperature alarmSet the high temperature alarm value. When the detected temperature exceeds this value, the screen flashes and the buzzer sounds an alarm.
Package includes:
1 x Digital display embedded cabinet thermostat
