Description
Main Features:1/2/3 switches have their own unique distinctions, so that you don't turn on/off the wrong lights.With red and blue LED indicators, it will not be dazzling in the dark and will not be very bright (bring you a very comfortable feeling) red on, blue offSingle live wire control, easy to install, directly replace the old switchToughened glass to prevent scratches on knife or hard objects.Applicable to: incandescent bulbs, fluorescent lamps, energy-saving lamps, LED lamps (power lamps above 3W)Tempered glass, easy to clean. Does not fade, looks like newCan be touched with wet handsFireproof, strengthen the protection against short circuit of power cordProtection against overcurrent and anti-interference.After the power is turned off, the switch remains off
Unique mnemonicOne-button switch icon corresponds to an indicator light, don't worry about turning off the wrong lightWhy choose us1. The indicator lights are obviously different, so you will not turn on/off the lights by mistake.2. After special optimization of the light, the indicator light is very soft and does not hurt the eyes.Slight Light indicatorDon't disturb sleep, enter to make you safer in the darkTwo indicator colorsSoft lighting, on: red light / off: blue lightTempered glass panelTempered glass panel is not only scratch-resistant, but also brings you a better touch experienceHigh stnsitivityYou can touch the switch with wet handsOff By DefaultTurn off the power, the switch remains off after the power is turned on again
Wiring Diagram:Fire wire connects "L" TerminalLighting wire connects "L1,L2, L3" Terminal1 gang connectsL2Terminal2 gang connectsL1,L3Terminal3 gang connectsL1,L2,L3Terminal
Capacitor InstallationWhen the lamp start flashing,please connect the capacitance between l and n line
Product parameter:
Standard: EUShell material: PC flame retardant materialPanel material: Tempered glassInstallation hole distance: 60mmRated voltage: 90-250V,50-60HzStart method: Touchcertified product: CE FCC ROHSLoad power: 3-300W/gangMaximum current: 10A
Package included:
1 x Wifi Touch Switch
1 x Manual1 x Screws1 x box
NOTE:
1.This wall switch does not have 433MHZ. Can not be paired with the wireless switch panel.2. The switching power is 3~300W. If the power of the bulb more than 300W, please do not use this switch. If the power of the bulb is less than 3W, please be sure to install a capacitor, otherwise it will not work properly.
WARM REMINDER:
Don't lid on the glass panel when the switch is in electrical.The glass panel was lid on when it is in electrical. then the switch will not workplease Restart the main electric switch in your home. it will work
Solutions to the problem of insensitive touchProblem: The switch base is screwed too deeply and tightly, causing a gap between the backlight board and the panel.Solution: Don't screw the lock screw too deep, if you can't reach it, you can replace it with a longer screw; or fill something between the switch and the bottom box. For touch-sensitive situations, as long as you pay a little attention during installation, it usually rarely happens.
