Description
Specifications:Size: 150*150/200*200/214*214/220*220/235*235/310*310
Type: 2Pcs A-side + 1Pcs B-side a set of square stickers
Product adhesive: high temperature PET double-sided adhesive
Product effect: printing platform temperature 80 ?
Product material: composite material
Product characteristics: ready to use, suitable for any printing platform, than the paper is convenient and fast without bubbles
Use requirements: hot bed temperature does not exceed 80 degrees, or cold bed printing
Installation instructions: peel off the protective paper behind the B side of the magnetic sticker, directly attached to the hot bed platform and then adsorbed on the B side of the printing layer A side can be printed, adsorption needs to be adjusted to the magnetic pole direction
Caution:
1. must be leveled before use (the distance between the nozzle and the platform should not be too large)
2. If the machine can not be leveled height, please be careful to place an order
3. Please do not directly contact the surface of the high temperature nozzle
4. the platform temperature can not exceed 80 degrees or will be demagnetized (room temperature for magnetic)
5. if the use of the process found in the first layer of sticky situation PLA is generally the nozzle and the distance between the sticker is too large. Use ABS to print longer and larger models recommended that the stickers above the brush a layer of glue can be a good guarantee of the effect
Pakckage Included:
1 x Magnetic Sticker Flexible Platform Sticke
