Description
Overview:This is an E-Ink raw display, 1.02inch, 128×80 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features:
No backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingComes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications:
Operating voltage: 3.3VInterface: 3-wire SPI, 4-wire SPIOutline dimension: 32.6mm × 18.6mmDisplay size: 21.76mm × 14mmDot pitch: 0.175 × 0.17Resolution: 128 × 80Display color: black, whiteGrey scale: 2Full refresh time: 2sRefresh power: 26.4mW(typ.)Standby power: <0.017mWViewing angle: >170°
PIN Function:
VCC: 3.3V/5V power inputGND: power groundDIN: SPI communication M0SI pinCLK: SPI communication SCK pinCS: SPI chip select pin (active low)DC: data/command control pin (high level indicates data, low level indicates command)RST: External reset pin (low level reset)BUSY: Busy output pin (means low level busy)
Documents:
Schematic: Click here to openInstruction: Click here to openSample tutorial: Click here to openGithub: Click here to open
Package includes:
Bareboard:1 x Display board
With driver board:1 x 1.02inch display1 x 8pin dupont cable
