YDZ 1530B One Component Moisture Curing Elastomeric Adhesive Black Universal Strong Bonding Glue

Description:
This item is a one component elastomeric moisture curing elastic adhesive, which is applied for about 5-10 minutes, will have a strong adhesion and become stronger with time. Simple operation, good anti-vibration, anti-impact performance, even have unique advantages in material expansion, shrinkage and other mitigation of stress.

Specification:
Brand: YDZ
Model: 1530B
Capacity: 150g
Glue Color: Black
Features:
– Safe, solvent-free
– Single component, fast curing
– Wide range of adhesion, good flexibility

Instructions:
1. Apply on both sides, apply to curved object, vertical object, weight object, etc., suitable for the initial requirements of high adhesive strength.
? Apply a thin, even layer on both sides of the joint; (Thickness is about 0.5-1.0mm.)
? Place it for 5-10 minutes;
? When viscidity becomes similar to tapes, bond it quickly and press hard for 10 minutes to secure it.
2. Apply on one side, suitable for horizontal surface adhesion, and it initially does not require strong adhesion.
? Apply a thin, even layer to one side; (Thickness is about 0.5-1.0mm.)
? Bond it quickly and press hard. for 10 minutes to secure it.
3. Place 1 hour, not move, about 24-48 hours completely fixed. In case of poor adhesion due to insufficient placement time, please reapply and paste.
Notice:
1. Do not inhale or drink because it is harmful to human health.
2. Please use the protection tool properly when using this product.
3. Please keep away from the child’s hand.
4. This product is for industrial use. Please follow the industrial use method.
5.Please use it on the basis of confirming the proper use method and use.
Emergency Treatment:
1. If contacting with eyes, wash with water for more than 15 minutes or consult a doctor for treatment
2. When attached to the skin, please clean thoroughly with clean water or soapy water
Preservation:
1. Keep the pipe mouth clean, tighten the bottle cap, seal and keep to prevent the colloid from hardening.
2. Avoid light preservation in -5~25 ? temperature.
3. The waste of containers and products should be treated as industrial waste.
Package Included:
1 x One Component Moisture Curing Elastomeric Adhesive (150g)
1 x Syringe
3 x Needles
1 x Plastic Tip
1 x Plastic Brush