Description
Function1. Quick Scan: Quickly obtain vehicle information, smoke test, MIL status, and DTC information.
2. Read DTCs: You can read stored DTCs, pending DTCs, and permanent DTCs, and give maintenance instructions.
3. Clear the fault code: After selecting to clear the fault code, the yellow engine fault light on the instrument panel goes out.
4. Data flow: Read the real-time data flow information of the engine, and display the current data flow through numbers, dashboards, graphs, etc.
5. Freeze frame: Read the relevant freeze data when the vehicle has a fault code.
6. Smoke test: Read the status of detectors such as misfire, fuel system, NMHC catalyst, etc.
7. Oxygen sensing: Read the oxygen sensor monitoring test results.
8. Mode 6: Request the on-board surveillance test results for a specific surveillance system.
9. MIL status: read the data before and after the engine failure.
10. Vehicle information: Read vehicle information such as VIN, calibration ID, and simplified verification code.
11. View reports: View reports such as quick scan, fault code analysis, etc.
Supported Protocol
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
Specification
1. Communication method: Bluetooth 4.0
2. Working voltage: 12V
3. Working current: 26mA
4. Working temperature: -40~80 degrees Celsius
5. Working humidity: less than 60%
6. Product size: 47x46x24mm
