Description
1) Features:- Supported MegaPirateNG and MultiWii firmware
- Up to 8-axis motor output
- 8 input channels for standard receiver
- 4 serial ports for debug/Bluetooth Module/OSD/GPS/telemetry
- 2 servos output for PITCH and ROLL gimbal system
- A servos output to trigger a camera button
- 6 Analog output for extend device
- A I2C port for extend sensor or device
- Separate 3.3V and 5V LDO voltage regulator
- ATMega 2560 Microcontroller
- MPU6050 6 axis gyro/accel with Motion Processing Unit
- HMC5883L 3-axis digital magnetometer
- MS5611-01BA01 highprecision altimeter
- FT232RQ USB-UART chip and Micro USB receptacle
昈n board logic level converter
昅atch the standard of RoHS
2) Flight mode for Multiwii
昈ne of the following basic mode
- Acro
- Level
- Alt Hold
- Head Lock
- Optional mode
- HeadFree (CareFree)
- GPS Hold (Need GPS receiver or Extend Board)
- GPS Back to home position (Need GPS receiver or Extend Board)
3) Flight mode for MegaPirate
- Acro
- Alt Hold
- Simple
- Loiter (uses GPS)
- Guided (uses GPS)
- Position (uses GPS)
- Circle (uses GPS)
- RTL (uses GPS)
- Auto(uses GPS)
- Follow Me(uses GPS)
4) Input power selection
- One of the following way
- Connect 5V power cable from ESC or UBEC to the ESC/Servo port, the J1 jumper must be closed.
- Connect 5V~12V power cable to the extend power port, the J1 jumper must be removed.
When using Extend Board, AIO PRO must be powered from the extend power port.
5) General
- Dimension: 50mmX50mm
- Height: 11.6mm
- Weight: 14.2g
- Fixing hole spacing: 45mm
- Hole diameter: 3mm
6) Package content
- AIO PRO FC x 1
- 3Pin to 1Pinx3 cable 100mm x 3
- 3Pin to 3Pin cable 100mm x 1
- Molex 1.25mm 4Pin cable 100mm x1
- Molex 1.25mm 6Pin cable 100mm x2
- Molex 1.25mm 8Pin cable 100mm x1
