120W 110V 11X9cm Silicone Heating Plate For Car Engine Tank Heater

Description

: 1. High insulation performance, breakdown voltage up to 20 50KV,mm 2. Silicone rubber heating plate is very convenient to install, it can be vulcanized by room temperature vulcanized rubber. 3. Used for heating elements: The heating wire of nickel alloy is wound around the glass fiber, the heating power can reach 2.1W,cm2, and the heating is more uniform. 4. Moisture-proof silicone rubber material provides longer heater life. 5. Fast heating, uniform temperature, high thermal efficiency and good toughness 6. Convenient, safe and waterproof Feature: Name: 120W 110V 11x9cm Silicone Heating Plate For Car Engine Tank Heater Model: A79998 Material: Alloy heating wire , silicone rubber Color: Orange Size: 11x9cm Voltage: 110V Power: 120W Note: 1. The use of this type of electric heating device must be noted that its continuous use operating temperature should be less than 240 degrees C, instantaneous does not exceed 300 degrees C. 2. The silicone electric heating device can work and be pressed, that is, it is pressed against the heated surface by the auxiliary pressing plate. The heat conduction is good, and the current density can reach 3W,cm2 when the working temperature does not Exceed 240 degrees C. 3. Under the installation condition of the paste, the working temperature is allowed to be less than 150 degrees C. 4. In the case of dry air in the air, the power density shall be less than 1 W,cm2 due to the temperature resistance of the material, in the case of non-continuous operation, the power density may reach 1.4 W,cm2 . 5. The working voltage is selected according to the principle of high power - high voltage, low power - low voltage, and special needs can be listed. Application: Various automobile fuel tanks, water tanks, and batteries. Warning: This product is a US three plug, we will distribute adapters according to different countries. Package Included: 1 X Silicone Heating Plate