Description
Overview: The wireless receiver controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to adopt traditional jumper or dial-code switch encoding. It only needs to receive and store the wireless signals transmitted by the remote control to realize the supporting use. If the learned remote control is lost in the process of use, the information stored in the receiving controller should be cleaned up. The lost remote control will not be able to remote control the receiving controller. In order to regain the right of use, the user must learn again before using it.It is mainly used in the fields of electric door, window, lifting equipment, gate, elevator, industrial control and security. Way of working: DC-24 has five working modes: signal self-locking, signal interlocking, signal non-locking, signal self-locking and non-locking coexistence.1. Signal self-locking -- press the remote control number 1 button2. Signal is not locked -- press the remote control number 2 button3. Signal interlock - press the remote control button 34. Signal 1~6 way self-locking and 7~12 way non-locking coexistence - press remote control 4 key5. Signal 1st self-locking and 2~12 way non-locking coexisting - press remote control 5 key Output method: 1. Signal self-locking: press the remote control button 1Press the remote control No. 1 button, the relay corresponding to the No. 1 button is pulled in it and held, and then press the No. 1 button again, the No. 1 relay is disconnected; Press the No. 2 button of the remote control, the No. 2 button corresponds to the relay is pulled in it and hold, and then press No. 2 key again, the 2nd relay is disconnected; the 3~12 key works according to this cycle. 2. Signal is not locked: press the remote control button 2Press and hold the remote control No. 1 button, and the relay corresponding to the No. 1 button is pulled in. After the hand is released, the relay is disconnected. Press the No. 2 button, and the relay corresponding to the No. 2 button is pulled in it, and disconnected after being released; 3~12 button Work as usual. 3. Signal interlock: press the remote control button 3Press the remote control No. 1 button, the corresponding No. 1 relay is pull in it ,and held, press the No. 2 button, the No. 1 relay is disconnected, and the relay corresponding to the No. 2 button is pulled in it, and held; the 3~12 button works according to this cycle.4. Signal 1~6 way self-locking and 7~12 way non-locking coexistence: press remote control button 4Among the 12 relays corresponding to the remote control, 1 to 6 are self-locking functions, and 7 to 12 are non-locking functions. 5. The signal 1st self-locking and 2~12 way non-locking coexistence: press the remote control button 5Among the 12 relays corresponding to the remote control, the first one is a self-locking function, and the 2~12 are the non-locking function. Note: If the learned receiver need to change to other functions, please clear the receiver and select the required button to re-code the code. Learn method: When the receiver is powered on, press the learning button on the receiver to light up and release, enter the learning state; according to the function you need to select a key to learn by the remote control, the receiver flashes one time (the buzzer sounds once) means that the study is successful. Clear method: When the receiver is powered on, press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out (the buzzer sounds for about 3 seconds), indicating that the code has been successfully cleared. This receiver can store about 30 different remote control codes. Technical parameter: Working voltage: DC24VQuiescent current: ?7mAWorking temperature: -20 ° C - +70 ° CReceive sensitivity: ?-107dBmOperating frequency: 315MHzControl voltage: AC, DC optionalOutput current: ?5ABoard size: 120mmx73mmx18mmShell size: 125mmx78mmx30mm Industrial 12-key remote control parameters: Working voltage: DC6V (4 batteries on the 5th, the battery is not included)Quiescent current: 0mAWorking frequency: 315MHZ/433MHZ (Optional)Chip Type: Fixed Code (2264)Oscillation resistance: Default 475 Launch distance: 200-500M (open environment)Modulation method: ASK amplitude modulationSize: 70 x 158 x 38mm Package includes: 1 x Receiver1 x Remote control
