12V 38mm Electric Stainless Submersible Water Pump Oil Fuel Transfer Refueling

Description

: Low noise, fast speed Seal performance is good, multi-channel seal Stainless steel shell, not easy to deformation, but also to prevent the shell rust, rot. With a stainless steel filter, make the extracted diesel or water cleaner Specification: Model: 679917 Material: Stainless steel Color: Silver Size: 140x38mm Pump Diameter: 38mm Voltage: 12V Maximum Load Current of 1.5A Motor Speed: 8700r , min Traffic: 12 L , min : other Model: YB-38 Pressure: 2 Mpa Material: Aluminum alloy Pump shaft position: horizontal Impeller suction method: single suction Drive method: electric Performance: no blockage, corrosion resistance, wear resistance Uses: submersible pump Principle: Vane pump Conveying medium: oil pump Flow rate: 1900 m3,h Head: 2 m Number of impellers: 6 Instructions: 1. The pump pumping should first take a good self-contain oil hose, and then put the pump completely into the clean oil or water 2.The pump after use, should put the pump from the oil or water out in time. 3.The bottom of the oil pump filter with stainless steel filter to make the extracted diesel or water cleaner. The bottom filter is equipped with a threaded connection for easy removal, maintenance and replacement. Can achieve the purpose of repeated use. 4.The pump maximum output of oil of 12 L , min Note: 1.The pump is prohibited pumping gasoline,alcohol and other flammable liquids. Can not load and run dry pumping. 2.The pump should be intermittent work in each time to use no more than 20 minutes, stop for 10minutes and then continue to use pay attention to work for not long time 3. Before use, make sure that the power cord and the oil pump power cord are in good contact. voltage tolerance ±5 percent , note the postive and negative pole. Package Included: 1 X Submersible Pump 1 X Manual