Description
Features:The receiving board of the remote controller is suitable for electric control circuits such as anti-theft alarm, remote control of electric doors and windows, signal control, industrial control, lifting equipment, etc. Relay contacts of remote control switch module output independently, which is very suitable for direct control of all kinds of loads. The product adopts fixed code wireless coding technology, without directionality, and switches do not interfere with each other.
The receiving board can withstand up to 10A current per circuit and drive AC load directly. Each relay has a set of normally open (normally closed) contacts. Specification:
Product model: RD1CHOperating Voltage: 220VWorking frequency: 315MHZContact capacity: <10A/250VAC; 10A/30VDCReceiving sensitivity: >-105dBRemote control distance: 1000 meters (No interference in open space) This distance is the theoretical distance without interference, and it will be reduced according to different environmental disturbances and partition walls during use. Generally it is about 10%-50% of the nominal distance.Number of control channel: 1
Remote control battery: 12V23A
Operation method: Short press operation (press and leave less than 5 seconds) button can be switched to jog, interlock and self-locking working status in turn, and the current working status is indicated by LED indicator:Short press the operation button once, the LED flashes once, this is the jog modePress the operation button again shortly, the LED flashes twice, this is the interlocking modePress the operation button again, the LED flashes three times, this is the self-locking modeShort press again to repeat the a operation. Long press operation (press and leave more than 5 seconds) button, release the button LED to go out, enter the encoding self-learning state, press the control button of the remote control handle, you can learn and remember the address and button encoding information, and the information Save to the memory chip. After the information is saved, the LED light will be off after 6 flashes. Learn a button in one operation. After two operations, the two buttons on the handle can correspond to the 1, 2 control circuits on the remote control switch. With this feature, a multi-button remote control (16-key) and multiple remote-controlled switchboards can be combined to form a remote control system.If you have already learned the two button codes, press and hold the learning button again to overwrite the button code information for the first learning. Package included:
6 x Receiver board with case
1 x Remote control
