Description
Overview:This product is mainly used in various remote control fields such as remote control 220V motor forward and reverse rotation, remote control electric door, rolling gate sliding up and down, remote control curtain sliding left and right, remote control elevator up and down, and security and anti-theft. The equipment to be controlled can be used to achieve the forward and reverse of the motor, or the on and off conversion of the switch to achieve wired and wireless compatibility.
The receiving controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to use traditional jumpers or code switch coding. The wireless signal transmitted by the remote control needs to be transmitted to the receiving controller. It can be used as a complete set after receiving and storing. Each receiving controller can store multiple transmitters (remote control). If the learned remote control is lost during use, the information stored in the receiving controller needs to be cleared, and the lost remote control will not be able to receive it. The controller is remotely controlled. If you want to regain the right to use it, the owner must learn it again before using it. This not only avoids the owner's worries when the remote controller is lost, but also provides convenience for adding a new remote controller.
The main technical parameters and operating instructions of the controller:1. Input voltage: AC 220V2. Output voltage: 2 live wires (the zero wire of the motor is connected to the grid)3. Applicable motor: 220V, 3 lines of forward and reverse motor under 300W (forward rotation line + reverse line + common line)4. Output device: relay (including normally open contact)5. Working mode: Interlock (2 relays are locked to each other, and one relay works each time to control the forward and reverse rotation of a motor together.6. Coding method: learning code7. Dimensions: 100×52×25mm8.Working frequency: 433/315MHZ(optional)9.Remote control distance: 100M10. The functions of the keys on the remote control and the control panel: ? key: scroll up, the motor reverses forward; ? key: scroll down, the motor reverses reverse; stop key: stop, release from power failure.
Package included:
1 x Forward and Reverse Controller 1 x Remote Control
About the code matching and wiring of the controller:1. Code matching: open the receiver panel, press and hold the learning button (set button) after connecting the power, the indicator light starts to flash, release the learning button and press any button on the remote control, the indicator light is off, indicating successful learning . (After the learning is completed, press the up or down button on the remote control to hear the beating sound of the relay), otherwise, please study again.2. Wiring: Connect the power line and each control line according to the markings on the circuit board. After the wiring is correct, the power supply can work.
The lead wires of the receiver are respectively connected to the four leads of the tubular motor (the yellow and green wires can be directly grounded). The wiring diagram of the four wires of the tubular motor can generally be found on the nameplate on the surface of the motor or on the manual. This controller The limit is not considered, because the tubular motor itself comes with a limit device.
The following figure is a schematic diagram of the wiring, the figure in the thin dashed box is the schematic diagram of the tubular motor. Note: To ensure your safety, please turn off the power before installation!
