Description
Documents:Product specification: Click here to openSchematic diagram: Click here to openat_instruction_set_CN_ONLY: Click here to open (If you mind about this, please don't buy)
hardware_info: Click here to open
serial_tool: Click here to open
Feature:
Ca-01 development board characteristics and detailed parametersCommunication system4GApplicable frequency bandLTE-FDD: B1/B3/B5/B8LTE-TDD: B34/B38/B39/B40/B41General characteristics3GPP E-UTRA Release 13Band width: 1.4/3/5/10/15/20MHZModule size: 24.0mm x 24.0mm x 2.3mmPackage method: stamp hole + LGAModule weight: about 2.6gPower supply voltage: 3.3V~4.3V, typical value 3.8VSupport VolteSupport TTSSupport BluetoothSupport Wi-Fi positioningSupport base station positioningSupport SPISupport MIPI CameraSupport SPI LCDSupport 6 x 6 scanning keyboardTemperature rangeNormal working temperature: -35°C~+70°CMaximum operating temperature: ~40°C~+85°CTransmit powerLTE-TDD: Class3 (23dBm+1/-3dB)LTE-FDD: Class3 (23dBm+-2dB)LTE featuresSupport Cat. 1Support volteSupport 1.4~20MHz RF bandwidthLTE-TDD: Uplink and Downlink Configuration 2Maximum uplink rate 2Mbps, maximum downlink rate 8MbpsLTE-TDD: uplink and downlink configuration 1Maximum uplink rate 4Mbps, maximum downlink rate 6MbpsLTE-FDD: Maximum uplink rate 5Mbps, maximum downlink rate 10MbpsNetwork protocol characteristicsSupported: TCP/UDP/PPP/FTP/HTTP/NITZ/CMUX/NDIS/NTP/ HTTPS/PING/FTPS/FILE/MQTT
Under development: SMTP/SMTPS/MMS/DTMFUSIM card interfaceSupport USIM/SIM card: 1.8V and 3VUSB interfaceCompatible with USB 2.0 (only support slave mode), data transfer rate up to 480MbpsUsed for AT commands, data transmission, software debugging, software upgradesUSB virtual serial port driver: Supports USB drivers under Windows 7/8.1/10, Linux 2.6.X/3.X/4.1, Android 4.x/5.x/6.x/7.x and other operating systemsSerial portUART1:"For AT commands and data transmission"Maximum baud rate 921600bps, default 115200bps"Support hardware flow control (CTS/RTS)UART2:"For debugging information output Baud rate 115200bpsHOST UART:Used to output debugging informationZSP UART:Used to output debugging informationAntenna interfaceCharacteristic impedance 50 ohmRoHSAll devices are fully RoHS compliantPackage117 pins, see the pin diagram for the actual available pins.
Ca-01 Sensitivity Data SheetFDD B1-99dBm(10M)FDD B3-99dBm(10M)FDD B5-100dBm(10M)FDD B8-100dBm(10M)TDD B34-99dBm(10M)TDD B38-99dBm(10M)TDD B39-99dBm(10M)TDD B40-100dBm(10M)TDD B41-99dBm(10M)
Package includes:
1 x Board
