Description
Application scenarios:Car/motorcycle/electric vehicle modification; LED lamp/yard light control; electric door remote modification; access control; electric curtain and other motor forward and reverse control; and other intelligent control and security alarm fields.
Learning and clearing methods and steps:
1. Button function:
The two buttons on the controller are the learning button (LEARNING) and the mode switch button (MODEL);
2. Learning method:
Press the learning button once, the indicator light flashes (into the learning state), press any button on the remote control, the indicator light flashes three times quickly, indicating that the No. 1 relay has learned successfully; press the learning button twice, repeat the above steps, and learn the No. 2 relay;
3. Working mode switching: (when all relays are off, the power can be disconnected and then re-powered during operation)
Jog: Press the mode switch button once, the indicator light flashes once and then goes out to indicate that the jog setting is successful.Interlock: Press the mode switch button twice; the indicator light flashes twice and then goes out to indicate that the interlock setting is successful.Self-locking: Press the mode switch button three times; the indicator light flashes three times and then goes out to indicate that the self-locking setting is successful.Delay 5 seconds: Press the mode switch button four times; the indicator light flashes four times and then goes out to indicate that the delay setting is successful.
4. Clear code: long press the learning button until the indicator light is always on.
Explanation of the meaning of self-locking/interlocking/jogging:
Interlock: Press the corresponding key of the remote control by hand, the corresponding relay is turned on, and then press another remote control key; the relay is turned off.Non-locking, jog: press the remote control button by hand, the corresponding relay is turned on, and the remote control button is released; the corresponding relay is turned off.Self-locking: Press the remote control button once to turn on the relay, and press the remote control button again to turn off the relay.
Technical parameter:
1. Working voltage: AC/DC12-50V2. Quiescent current: 10mA3. Working current: 30mA-90mA3. Working temperature: -20?-80?4. Receiving sensitivity: -103dBm5. Working frequency: 315/433 frequency6. Load range: less than 10A7. Output mode: switch signal contact output8. Size: 68mm*48mm*20mm
Package includes:
1 x Transmitter1 x Receiver
