Description
Receiver Description:1, Working voltage: DC12V2, Quiescent current: 8mA3, Operating frequency: 433MHz4, Load power: Each channel 10A5, Receiving sensitivity: -105dbm6, Frequency deviation: -0.2MHz~+0.2MHz7, Coding method: learning type8, Working mode: jog, self-locking, interlock9, Modulation method: ASK10, Remote control distance: 100M (wild)11, PCBA size: 48mm*68mm*18mm12. Shell size: 76mm*56mm*30mm13, Working environment; -10?~ + 60?
Wiring instructions:
1, +: Connect to the positive 12V power supply2.-: Connect to the negative electrode of 12V power supply3, A: output; normally open end of the relay4, B: output; relay common;5, C: output; normally closed relay
Function selection:
1. Set to Jog /Momentary output: Remove the jumper cap on the board.2. Set as Self-locking /Toggle output: short the "T" and the middle pin with the jumper on the board.3, set to Interlock/ /Latched output: use the jumper cap on the board to short "L" and the middle pin.Learning/clearing methods and steps:1. Press the pairing button, the indicator light goes off, let go, and press any button on the remote control, the indicator light will blink three times, and then it will be on. Means learning success;2, can learn more than 20 different address code 2262 chip, 1527 chip equivalent frequency wireless remote control;3. Clear: Clear: press and hold the pairing button for about 8 seconds. The indicator will turn off and on, indicating that the stored information has been successfully cleared.
Note:
1. Do not operate with electricity. Turn off the power and operate it. Check the power supply after use.2. When the voltage of the remote controller is insufficient, please change the battery in time (when the remote controller battery voltage is insufficient, the general remote control distance becomes close).3. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have a strong source of interference, to avoid the remote control and the receiving distance being short or unable to work properly.4. Do not use this electronic product abnormally. Unusual use will reduce product performance and longevity. In severe cases, damage to the product will also bring hidden dangers to your safety.
Package included:
1 x Switch1/2/5 x RF Remote Control (optional)
