Description
Specification: Model : GT-24Module size: 30.3 × 14.5mm (including PCB antenna)Operating frequency band: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)Interface mode: 1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)Supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)Communication level : 0.7VCC ~3.3V (VCC refers to the module supply voltage)Measured distance: 1000m (clear open space, maximum power, height 2m, 250k air speed)Transmit power: 4 levels adjustable (maximum 20dBm, approx. 100mW at maximum power)Air speed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)Shutdown current: approx. 30uA (test condition: CE=0, power-down mode, VDD=3.0V)Emission current: about 90mA (power supply capacity must be greater than 250m)Receive current: about 20mAAntenna form : PCB antenna / ipex carrier antennaCommunication interface : SPI maximum speed up to 10MbpsTransmit length: Single packet 1~32 bytes Level 3 FIFOReceive length : Single packet 1~32 bytes Level 3 FIFORSSI support : Not supported (only simple packet loss statistics are supported)Receive sensitivity: -94dBm@250kbpWorking temperature: -40 ~ +85 °C (industrial grade)Storage temperature: -40 ~ +125 °C (industrial grade) Features: - The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial grade wireless transceiver integrated data transmission module.- The module comes with a high-performance PCB antenna, precise impedance matching, and the nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission distance and lower power than the nRF24L01.- Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in the ISM band of 2.4GHz~2.5GHz.- The module has sufficient transmit power, good spectral characteristics, small harmonics, small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and industrial grade standards.- It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is convenient for users to use with various circuits.- The GT--24 module also comes with a built-in PCB antenna and an ipx carrier external antenna, which greatly enhances the module's free characteristics and gives the user the greatest freedom.Pin Instruction:
Serial numberNamePin directionPin usage1VCC /Power supply must be between 2.0-3.6V2 CE inputModule control pin, see nRF24L01P Datasheet3 CSN inputModule chip select pin for starting an SPI communication4 SCK inputModule SPI bus clock5 MOSI inputModule SPI Data Input Pin6 MISO outputModule SPI Data Output Pin7 IRQ outputModule interrupt signal output, active low8 GND /Ground wire, connected to the power reference ground9 GND /Ground wire, can be used for patch fixing10 GND/Ground wire, can be used for patch fixing Package Included: 1 x GT-24 Digital Wireless Module
