Description
1. FC- MCU: 168MHz STM32F405
- Gyro: MPU6000
- Black box: 8MB
- OSD Chip: NO (Analog OSD not available)
- BEC: 5V 2.5A (3A MAX) / 10V 2.5A (3A MAX)
- Voltage sensor scale: 110
- Current sensor scale: 100
- Inverter for SBUS input (UART2-RX)
- Beeper pad: Yes
- RSSI input pad: No
- UARTs: 5
- Motor outputs: 4
- 8 pin for DJI air unit port (10V,GND,T1,R1,GND,R2I,T2,5V)
- BLHeli32 Telemetry: RX4
- Input voltage: recommended 2-6S
- Firmware: IFLIGHT_F405_AIO
- Mounting distance: 30.5 x 30.5mm
- Dimensions: 40.5 x 43mm
- Weight: 11.4g
- USB type-C
2. ESC
- 6 layers double-sided PCB board
- 2oz 1.6mm thick power board
- 32bit STM32F051 MCU, 48M maximum clock speed
- TDK MLCC Low ESR ceramic capacitors
- MCU: STM32F051
- Capacitance: 484uF
- Current Sensor: Yes
- Input: 2-6S LIPO
- Constant: 40A / Burst: 50A
- BlHeli32 telemetry: Yes
- BEC: 5V/500MA
- Supports up to Dshot1200, Proshot, Oneshot, Multishot
- Target: iFlight-BL32-4IN1
- Mounting distance: 30.5 x 30.5mm/4mm
- Dimensions: 43 x 39mm (including the power pads)
