Description
Double-sided Textured PEI Spring Steel Sheet for 3D printersThis will be an incredible product ,It allows you to experience unparalleled happiness when you pick up your pieces.?Benefits:No more 3M Masking tapeNo more glue sticNo more ABS juiceNo more PEI sheet replacementEasy to printEasy to remove by bending and popping it offEasy to maintainDouble-sidedLower runing cost especially for printing farmGenuine PEI powder coatingHardened steel spring sheet never diformingPossible to adding ABL for some low-cost printers?Material Compatibility:PLA ABS PETG TPU PVA etc.
?Kit List? Magnetic Base Double Sided Textured PEI Spring Steel Sheet (Optional)
?SIZE:
*The item is large in size and heavy in weight. Therefore, the transportation fee is very high. Please consider buying it again. Because we do not accept no reason to refund.The texture board may have a small flaw in the production process. We are all manual screenings to ensure that there are no major flaws. But there are some small flaws that cannot be avoided. If you do not accept, please do not buy. Thank you for your understanding.*Due to the size of the product is huge. In order to control the strength of the bend. We maintain a relatively thin thickness. So it is not flat when it is not magnetically adsorbed. When it is placed in a magnetic bed, it will be magnetically adsorbed so that it will automatically flatten.Other size available:165x165MM (forCreality Ender 2)220x220MM ?forAnet A8, Robo R2, Wanhao Duplicator6 ETC.?235x235MM (for Creality 3d Ender-3 Series)?Printer Compatibility:CR-10 3d PrinterSidewinder X1 SW-X1?Purchase recommendation?1: Your kit already includes a magnetic base. So you don't need to purchase additional magnetic base;2: Because of the thick material added on the glass. Therefore, we recommend that the temperature of your hot bed is 5~10 degrees Celsius higher than the usual temperature.?Maintenance:As with any build surface, make sure you are not printing too close to the bed to avoid possibly infusing the filament into the build surface. If printing PETG, TPU, TPE, and RYNO, make sure the bed is heated BEFORE attempting to remove the print from the bed.?Attention:*It is possible to mount our kit upon a larger bed, just be aware that you will have a reduced printing area. It is also possible to mount our kit upon slightly smaller beds; you can carefully trim the Magnetic Base, but the Flexi Plate will stick over your edges, be sure that there are no obstructions such as vertical frame element, and it is advisable not to have more than 10mms overhang per side to avoid warping. we are not responsible for mistaken order sizes.*Due to the size of the product is huge. In order to control the strength of the bend. We maintain a relatively thin thickness. So it is not flat when it is not magnetically adsorbed. When it is placed in a magnetic bed, it will be magnetically adsorbed so that it will automatically flatten.?Some using reference:https://www.matterhackers.com/articles/how-to-succeed-with-layerlock-powder-coated-pei-build-plates
