Description
Description:-The high-quality kit for Beginners, with Uno R3 board. This Uno R3 board is a complete clone of Uno R3.
- With Atmega16U2 as the USB to Serial converter, not like some revised Uno board with cheap and low-quality USB to Serial chip.
- With some interesting electronic modules, you can gain interest from the learning process.
- With some discrete components, like resistors, LEDs, buzzers, infrared receivers and so on. Please check the part list section or details.
Features Of the Board:
Including " Extension board" and a second "Extension board"(The "T" shape one), These two boards plus the breadboard, the discrete components will make it easy for you to set up the circuit on the breadboard.
Electronic Modules: With several interesting electronic modules, like Sound sensor, RTC, Relay module, Ultrasonic range detector and so on.
Package included:
1 x Mian board +1 x USB cable(0.5m Cable)
1 x GPIO Extension Board + 1 x Connecting Cable
1 x Breadboard(830 points)
1 x Mini Breadboard
10 x 3mm Red LEDs
10 x 3mm Green LEDs
10 x 3mm Yellow LEDs
1 x 5mm RGB LED
5 x Button with Cap
10 x 330 ohm Resistor
10 x 1k ohm Resistor
10 x 10k ohm Resistor
1 x 1K Adjustable Trim Pot Resistor (Potentiometer)
1 x 10K Adjustable Trim Pot Resistor (Potentiometer)
1 x 2.54mm Elbow 40 Pin Header
1 x 2.54mm Straight 40 Pin Header
1 x 5516 LDR(Photoresistor)
1 x Ball Switch
1 x Active Buzzer 5V
1 x Passive Buzzer 5V
1 x 74HC595 8bit Shift Register
1 x LM35 Temperature Sensor
1 x SS8050 NPN Transistor
1 x 1838 Infrared Receiver
1 x Infrared Sender
1 x Infrared Phototransistor(Flame Sensor)
1 x Infrared Remote controller(Battery Not Included)
1 x Stepper Motor
1 x SG90 Servo motor
1 x 1602 LCD
1 x 1-Digit Eight-segment Display
1 x 4-Digit Eight-segment Display
1 x 8*8 Dot Matrix Led Display
1 x Stepper Motor Driver Board
1 x Sound Sensor Module
1 x PS2 Joystick Module
1 x RTC module(Battery Not Included)
1 x Relay Module(5V-10A)
65 x Jump Wires
10 x Female-Female Dupont wires
10 x Male-Female Dupont wires
1 x 9V Battery Holder(Battery not included)
1x HC-SR04 Module
1 x MAX7219 Chip
1 x Ultrasonic Range Detector
1 x Plastic Box (Container)
