Description
Specifications: Control humidity range: 1%RH-99%RHLoad power: 10A/DC12VHumidity measurement range: 1% RH-999% RH Measurement error:±3% RH (good environment temperature is 25?)Control humidity accuracy: 1% RH display: 1% RHHumidity return: adjustable between 1-50% RHSupply voltage: DC12VOutput type: 10A relay outputProbe type: humidity resistance sensorSize: 48*29*22mm Installation hole: 46*27mMoisture control object: dehumidification or humidificationProbe line length: 1.5m line lengthWorking environment: humidity 90% RH no frosting Parameter Code and Settings:CodeDescriptionrangeFactory settingsP0Humidification/dehumidificationH/CCP1Backlash1-50%RH P2Set the maximum limit9995P3Set the minimum limit15P4Temperature correction-1010P5Delayed start0-101P6Restore Factory settingsON- OFFOFF Setting Instructions: 1.Connect the power supply and load to power the controller. The red color above shows the humidity, blue below is displayed as the desired humidity 2. Press STG (+) ENT (-) to set the required humidity,After the setting is completed, wait for 3 seconds to automatically confirm the return. At this time, the controller automatically performs relay energization according to the setting.3. Press and hold SET for 5 seconds to enter the main menu settings, press SET (+) ENT (-) to switch P0-P8, when adjusting parameters P0-P8 parameters4. If you need to adjust P0, press SET button (+) ENT (-) at the same time, adjust 0K, then control SET (+) ENT (-)Note: For 10A relays, to meet high power loads, please make sure the line is correct. Indicator Description: Indicator light: off means the relay is off, steady light means the relay is closedDigital tube: The above shows that LL is the sensor open circuit, indicating that HH is out of the measurement range, the humidity will forcibly open the relay. Package Included: 1 x W2026C DC 12V 10A Digital Hygrometer Humidity Meter
