Description
Features:1. Convenient direct output wiring2. Add buzzer and audible alarm3. Add pause button to stop urgently4. Ring waterproof sensor, easy to fix5. Start and stop setting mode, provincial conversion, which is more convenient6. Automatically save when power off, run automatically when power on7. Both Fahrenheit and Fahrenheit can be measured (need to switch mode) Specification:
Controller type : Normally open temperature controllerOperating Voltage : DC12V DC24V AC110~220VControl circuit voltage : DC12V DC24V AC110~220VRelay carrying power : 240W 480W 10A?max?Recommended power : ?Relay carrying power×80%Relay type : Normally open relayPower consumption : ?1WRelay service life : 100000 Timessensor : NTC10K 1%Range : -50?~120??±1%?Size : 67mm×45mm×34mmFixed way : Embedded Hole 63mm×42mm
Operation demonstration:
1. Application example: Heating method for hatching poultry eggs2.Incubation conditions: The optimum temperature is 38.6?, and the allowable temperature is 0.2?, then the incubation temperature range is 38.4?-38.8?3. Assumptions: It is assumed that the incubation equipment has been connected, but it is found that the measured temperature is 0.5? higher than the actual temperature4. Operation introduction:A: Press the SET button (10 seconds) on the conventional interface to enter the setting mode, the red digital tube displays the code, the blue digital tube displays the code parameter value; press SET key to switch the code, press up/down key Modify parameter valueB: Adjust the value of P0 to 38.4 and the value of P1 to 38.8C: Adjust P4 to -0.5D: After the code setting is completed, wait for 10 seconds to automatically save, the setting is completed
Note:All settings are automatically saved when power is turned off, run automatically when power is turned on, and no manual start is requiredPress and hold the SET key to power on to recover the factory settings, please refer to the manual for detailed parameters
Package included:
1 x W2310 Normally Open Temperature Controller
