Description
Incorrect usage:1. Full brush frequency is too high2. Power on for a long time without going to sleepThe above incorrect usage will cause irreparable damage to the screen. (Screen failures caused by improper use are not covered by the warranty)
Features: No need for backlight, power off can maintain the content of the last screen for a long timeVery low power consumption, basically only consumes power during refreshProvide complete supporting information manual (driver board schematic, Raspberry/Arduino/STM32 and other sample programs) Parameter:
Working voltage: 3.3VCommunication interface: 3-wire SPI, 4-wire SPIDimensions: 170.2mm × 111.2mm × 1.18mmDisplay size: 163.2mm × 97.92mmDot pitch: 0.255 × 0.255Resolution: 640 × 384Display color: black and whiteGray level: 2Global refresh: 6sRefresh power consumption: 38mW(typ.)Standby power consumption: <0.017mWViewing angle: >170°
Documents:
Schematic: Click here to openSample tutorial: Click here to openManual: Click here to open
Package includes:
1 x 7.5 Inch Ink Screen Bare Screen
Since the ink screen only needs to be displayed, the data line (MISO) received by the host is hidden from the slave.CS: slave chip select, when CS is low, the chip is enabledDC: data/command control pin, write command when DC=0; write data when DC=1SCLK: SPI communication clockSDIN: SPI communication master sends, slave receivesTiming: CPHL=0, CPOL=0 (SPI0)[Remarks] For specific information about SPI communication, you can search online for information
